Custom Jewelry Design Process

Have an idea for a one-of-a-kind piece, or a family stone you want to wear in a new way? Our team designs, casts and finishes custom jewelry right here in our Canon City shop. Here is how your piece comes to life, step by step.

From idea to heirloom

Four Steps to Your Custom Piece

  1. 1Design

    We design your piece in CAD and show you photo-realistic renderings before any metal is used.

  2. 2Prototype

    Your approved design is 3D printed in resin so the details can be checked in hand.

  3. 3Casting

    The model is invested, burned out and cast in your chosen metal.

  4. 4Finishing

    We clean up, set your stones, polish and inspect the finished piece.

How we make it

Our Process in Detail

MatrixGold CAD software on a monitor showing a 3D model of a diamond engagement ring
Step 1

Design

To create a timeless piece you’ll cherish for years, we use advanced CAD (computer-aided design) software. It lets us build a design around the diamonds and gemstones you already own. If you don’t have stones, we can source exactly what you need.

Following your ideas and guidelines, we design the piece with your stones precisely in mind for a perfect fit and balance. We use MatrixGold, one of the most advanced jewelry-specific CAD programs available. When the design is complete, we create photo-realistic renderings so you can see exactly how the finished piece will look – before a single gram of metal is used.

3D printer building jewelry prototypes layer by layer from photo-polymer resin
Step 2

Prototype

Once you approve the design, we make a physical prototype on our high-precision Asiga® 3D printer. A special photo-polymer resin, made for clean burnout and fine detail, is built layer by layer into a smooth, accurate model straight from the 3D file.

The printed model is then carefully cleaned, UV-cured for full hardness and prepared for casting.

Casting flasks filled with investment around blue resin jewelry models
Step 3

Casting

We attach the prototype to a sprue base and place it in a flask filled with investment (a plaster-like mold material). A vacuum removes air bubbles for a flawless mold surface.

After the investment hardens, the flask goes into a burnout kiln. A controlled heating cycle burns away the resin and leaves a precise cavity in the shape of your piece. Our induction casting machine then melts your chosen metal with exact temperature control for a clean, detailed pour. The result is a high-fidelity metal copy of your design.

Jeweler polishing a ring on a polishing wheel at the bench
Step 4

Finishing

After casting, we quench the flask in room-temperature water to remove the investment and keep the metal workable. We cut away the sprues, file off extra metal, then sand and shape the piece to bring back every design detail.

Working under microscopes, our setters secure your diamonds and gemstones with the technique that suits your piece – prong, bezel, pavé and more. A final high-luster polish brings out the shine. After a careful inspection and ultrasonic cleaning, your custom jewelry is ready to wear, finished to heirloom standards.

Your stones or ours

Start With What You Love

Many custom pieces begin with a stone that means something – a family diamond, a birthstone or a gem from a trip. We can design a new piece around it, find the perfect stone for you, or start from one of our semi-mounts: finished settings ready for the center stone you choose.

  • 1.0 carat total weight diamond semi-mount ring with bypass design in white gold
    Semi-mount1.0 Cttw. Diamond Semi-Mount

    Bypass design with channel-set side diamonds.

  • 3/4 carat total weight diamond semi-mount ring in yellow gold
    Semi-mount3/4 Cttw. Diamond Semi-Mount

    Yellow gold band lined with channel-set diamonds.

  • 1-3/8 carat total weight diamond semi-mount ring with woven design in white gold
    Semi-mount1-3/8 Cttw. Diamond Semi-Mount

    Woven shank accented with diamonds.

Ready to Start Your Design?

Bring your ideas, sketches or photos – and any stones you’d like to use – to our Canon City store. We’ll talk through your design, metal and budget together.

703 Royal Gorge Blvd, Canon City, CO 81212 · 719-269-7212 · info@nelsenjewelry.com